Kenmore 580.75080 - Manual (Page 10)

OPERATION
CONTROL PANEL
- REMOTE CONTROL SIGNAL RECEIVER
TIMER
-SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit is running, Use timer to set number of hours until shut-off.
• Every time you push Timer button, it advances the Timer
setting as follows: 1 Hour ► 3 Hours ► 6 Hours ►tO Hours
maximum.
TEMPERATURE SETTING
•Use these buttons to automatically control the
temperature of the room. The temperature
can be set to one of a temperature between
64“F to 82T.
• Push the TEMP up or down buttons to shift
the temperature setting from
82°F^76“F^70T>-64°F
POWER
•To turn the air conditioner ON, push this button.
To turn the air conditioner OFF, push
the button again.
•This button takes priority over any other button.
•When you first turn it on, the air conditioner is on
the High cool mode and the Temp, at 70°F.
AUTO RESTART
• In the event of a power failure,
the unit will run at the previous.
-START TIME
• If unit is off. Use timer to set number of hours before unit starts.
• Every time you push Timer button, it advances the Timer setting as follows: 1 Hour ► 3 Hours ► 6 Hours ►lO Hours
maximum.
MODE
• Push this button to shift the mode of operation from COOL-HI ► COOL-LOW ► FAN ONLY-HI ► FAN ONLY-
LOW.
HORIZONTAL AIR DIRECTION CONTROL
The horizontal air direction is adjusted by moving the vertical
louvers right and left with your fingertips. (FIG. 15)
VERTICAL AIR DIRECTION CONTROL
The vertical air direction is adjusted by moving the horizontal
louvers up and down with your fingertips. (FIG, 16)
- 10-