Kenmore 7881 - Manual (Page 10)

Setting Oven Controls (cont’d)
To Set the Minute Timer
Note: To turn the time of day display OFF or ON in the
display press {^) and hold for 15 seconds (thecontroi will
beep once) and then release. This feature does not remove
the set tirnepf day from the. memory of the control. When the
display Is turned .OFF the timeof day will re-appearforafew
seconds any time the (0j pad is touched.
1. Press (S) .
2. Press the to increase the time in one minute
increments. Press and hold the to increase the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.
Note: If the 'V' pad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3. The display shows the timer countdown in minutes until
1 minute remains. Then the display will countdown in
seconds.
4. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until (S) is pressed.
Important Notes: The indicatorlight located above the(S)
pad will glow while the minute timer is active. The minute
timer does not start or stop cooking. It serves as an extra
timer in the kitchen that will beep when the set time has run
out. The minute timer can be used alone or during any of the
other oven functions. When the minute timer is in use with
any other function, the minute timer will be shown in the
display. To view other functions, press the pad for that
function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press
and hold the yV or to increase or decrease the time.
To Cancel the Minute Timer before the set time has
run out: Press (S).
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77° C to 287”C).
To Set the Controls for Baking:
1. Press ^ . "------------------- " appears in the display.
2. Within 5 seconds, press the or 'N/'. The display
will show "350°F (177°C)." By pressing and holding
the y\ or ’V', the temperature can then be adjusted
in 5“F increments (1 “C if the control is set to display
Celsius).
3. As soon as the >V or 'V pad is released, the oven
will begin heating to the selected temperature. When
the displayed temperature reaches the desired baking
temperature, the preheat indicatorlight will turn OFF
and the control will beep 3 times.
4. To cancel baking, press
To Change the Oven Temperature after Baking has
Started:
1. Press Bate and make sure the bake temperature is
displayed.
2. Press the yV or 'V pad to increase or decrease the
set temperature.
To Set Control for Continuous Bake or 12
Hour Energy Saving
The oven control has a built-in 12 Flour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this featu re forcontinuous baking.
To set control for continuous baking:
1. Press and hold uSIl) down for 5 seconds until tone is
heard,"---------- hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the Continuous Bake function, press (S)
and hold for 5 seconds until tone is heard. "12hr" will
appear in display indicating that the control has
retu rned to the 12 Flour Energy Saving feature.
S Oven
Lockout
Thecontroi can be programmed to lock the oven doorand
lockout the oven control pads.
Note: If any control pad is pressed while in the Oven
Lockout mode, “Loc” will
appear in the display until
the, control.pad.lsTeleased,),.................... ........... ..............
10