Kenmore ULTRA WASH 665.1404 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PROBLEM
SOLUTION
ETCHING (PERMANENT
This is an erosion of the surface of the glassware and can be caused by a combination of:
CLOUDINESS)
water that is too hot, from using too much detergent with soft water or by pre-washing.
Detergent needs food soil to act upon. If etching has occurred, the glassware is
permanently damaged. To avoid further etching, adjust the detergent amount to match the
water hardness, stop pre-washing, and use water heating options only when incoming
water temperature is below 120°F (49°C).
LEAKING WATER
Be sure dishwasher has been installed properly and is level.
Suds can cause the dishwasher to overflow. Measure the detergent accurately and use only
detergents designed for use in a dishwasher. Less detergent is needed in soft water. Try
another brand of detergent if sudsing continues.
To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached and avoid
overfilling.
TUB IS DISCOLORED
NOTES:
■
High iron content in the water can discolor the tub.
■
Tomato-based foods can discolor the tub or dishware.
A citrus-based cleaner can be used to clean.
24