Kenmore POWER-MATE 116.24614 - Manual (Page 15)

EXHAUST FILTER CHANGING
A
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for
exhaust filter number.
1. Pull out and
up on the
exhaust filter
cover to remove
from the vacu­
um and lay
aside.
Exhaust
Filter
2. Pull the exhaust
filter up and out
from the rear of
the vacuum.
3. Replace the
exhaust filter
cartridge.
Place the new
filter into the
vacuum with
the
foam seat
facing
towards the
vacuum.
Exhaust
Filter
Tabs
4. Replace the
exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on
the vacuum and
rotate into place
until it snaps
closed.
15