To replace belt – Kenmore ASPIRADORA 116.36722 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every
time the belt is changed.
The agitator must also be cleaned accord
ing to the following schedule;
Vacuum Cleaner Use
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
LIGHT -
(used 1 time/week)
Clean Agitator
every week
every month
every 2 months
Remove any dirt or debris in the belt path
area or in the agitator area.
TO REPLACE BELT
NOTE: See PARTS AND FEATURES for
belt number.
Loop the new belt on the motor shaft.
Loop the end of the new belt on the agitator.
Insert the agitator by placing the rounded
portion of the end cap down into the slot
in the nozzle base.
Motor
Shaft
NOTE; Care must be taken due to the belt
tension during reassembly.
BELT ROUTING
Press firmly, checking to see that each end
is completely inserted.
Belt
Agita tor Assembly
Check to see that the belt is centered in
the belt groove. Turn the agitator with your!T;^;i'^' ^
fingers to see that it turns freely.
19