Kenmore ASPIRADORA 116.36722 - Manual (Page 6)

A
Please pay special attention to these hazard alert boxes, and follow any instructions
given. WARNING statements alert you to such dangers as fire, eiectric shock, burns
and personal injury, CAUTION statements aiert you to such dangers as personal
injury and/or property damage.
ASSEMBLY INSTRUCTIONS
^WARNING
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete. Failure
to do so could result in electrical shock
or injury.
Before assembling vacuum cleaner, check
the PACKING LIST on the cover of the sep­
arate Repair Parts List. Use this list to verify
that you have received all the components
of your new Kenmore vacuum cleaner.
HANDLE
Screw
Remove the
screw located
just below the top
edge of the back
of the vacuum
cleaner.
Slide the handle into the opening at the top
of the vacuum cleaner.
Insert the screw so it passes through the
handle into the vacuum cleaner.
Begin to tighten the
screw with your fin­
gers, It may be nec­
essary to adjust the
handle slightly.
Using a screwdriver, tighten the screw.
A
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum cleaner
without the screw in place.
HOSE
Loop the hose
over handle and
align “J" slots in
hose with tabs
on the exten­
sion wand.
Push the hose
onto the wand
and twist to lock
in place.