Light operation instructions, A warning, Halogen bulb replacement – Kenmore 640-82960819-9 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Light Operation Instructions
1 .Make sure the light power switch on the control
panel is in the “OFF” position.
2. Connect power plug to properly grounded outlet.
S.Turn the light power switch to “ON.”
A
WARNING
Keep any electrical supply cord away from any
heated surface.
Halogen Bulb Replacement
1 .Make sure that the grill has cooled before changing the
light bulb.
2.Make sure the light’s power switch on the control panel
is in the “OFF” position and power plug is disconnected
from the outlet.
S.Use a Phillips screwdriver to loosen the screw securing
the light cover.
NOTE:
When removing final screw from light cover, make
sure to use other hand to hold cover in place, ensuring it
doesn’t fall and shatter.
4. Loosen the screw securing the light.
i
HI
5.Remove the glass cover from the light bulb housing.
HINT
: Use a flathead screwdriver to open it easily.
Remove the glass cover from the light.
6. Use a flathead screwdriver to loosen the four screws
locking the bulb in place.
Loosen but do not remove the bottom two screws under the
light first.
....
■
12
I