Installation instructions for glass tray, Using an oblong dish – Kenmore ELITE 721.86003 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION INSTRUCTIONS FOR GLASS TRAY
To install:
1. Place the guide tray on the oven cavity bottom. The rollers on the shaft should fit inside the guide tray
bottom groove. (See figures 1,2-1, and 2-2)
2. Place the rotating ring on the guide tray. (See Figure 3)
3. Place the glass tray on the rotating ring. Fit the rollers of the shaft between the raised, hollowed groove
of the glass tray bottom. The rollers on the rotating ring should fit inside the glass tray bottom ridge. (See
Figures 4-1 and 4-2)
USING AN OBLONG DISH
When using an oblong dish, don’t forget to place it in the center of the guide tray, or poor performance
will result. An oblong dish which is smaller than 1 3 inches should be placed on the glass tray. A dish larger
than 1 3 inches should be placed on the raised edge of the guide tray preventing it from touching the
glass tray. Otherwise, poor performance will result. (See Figure 6)
Figure 6
10