Converting the lower element (cont'd), A warning, A caution – Kenmore POWER MISER 153.32676 User Manual

Page 12: Installation instructions (cont’d)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Converting the Lower

Element (cont'd)

9- Replace terminal cover on thermostat making sure that the

locking tabs on the terminal cover are in place.

Installation Instructions (cont’d)

12. Complete wiring to the water heater, or if completed, turn

“ON” electric power to the water heater after filling the

tank with water.

A WARNING

Make sure the thermostat is flush against the tank, the

terminal cover is in place, and the insulation is replaced.

Failure to do so can result in DEATH, SERIOUS BODILY
INJURY, OR PROPERTY DAMAGE.

10. Replace the insulation block and pad so that it completely

covers the thermostat and element.

A CAUTION

Never use this water heater unless it is completely full of

water. To prevent damage to the tank and heating ele­

ment, the tank must be filled with water. Water must

flow from the hot water faucet before turning “ON”

power.

11. Replace the access panel.

12

Advertising