To set the controls for baking, To set control for continuous baking, To set control for oven lockout – Kenmore 790. 4045 User Manual
Page 9: To set control for oven lockout feature, Setting oven controls (cont’d)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).
To Set the Controls for Baking:
1. Press . "------------------" appears in the display.
2. Within 5 seconds, press the ..... or . The display will show "350°F (177°C)". By pressing and holding the ■ or
, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius).
3. As soon as the ......» or pad is released, the oven will begin heating to the selected temperature. When the
displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the
control will beep 3 times.
4. To cancel baking, press )
stop
?■
To Change the Oven Temperature after Baking has Started:
1. Press and make sure the bake temperature is displayed.
2. Press the -■ .. or.. pad to increase or decrease the set temperature.
To Set Control
for
Continuous Bake or 12 Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more
than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
Timer
1. Press and hold s>-v'Off down for 5 seconds until tone is heard, "----------hr" will appear in display for continuous
cooking. The current time of day will return to the display.
Timer
2. To cancel the Continuous Bake function, press sot/oft and hold for 5 seconds until tone is heard. "12hr" will appear
in display indicating that the control has returned to the 12 Hour Energy Saving feature.
To Set Control for Oven Lockout
The control can be programmed to lock the oven door and lockout the oven control pads.
To set Control for Oven Lockout feature:
1. Press ", and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash and
the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is
flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will
appear in the display.
2. To cancel the Oven Lockout feature, press J
stop
} and hold for 3 seconds. The control will unlock the oven door and
resume normal operation.
Setting Oven Controls (cont’d)
fr,:
5"