Kenmore 141.16315800 - Manual (Page 11)

□ Align the 3 holes on Gas Tank Heat Shield with the Cart
Rear Panel and Front Cart Bracket.
□ Insert the 3 Phillips Head Screws M4x5mm from underside of
the Gas Tank Heat Shield and tighten securely.
Install Gas Tank Heat Shield
Phillips Head Screw IVI4x5mm
Qty. 3
Part # S112M0405A
(Black Painted)
Install Doors
□ Install the Door Handle to Right Door using Phillips Head Screw M4x8mm
□ Install the Door Guide Plate to Cart Bottom Shelf using
Phillips Head Screw 3/16"x3/8”
□ Insert Door bottom post into Bottom Door Hinge Bracket.
□ Hold the Right Door and install the Right Top Door Hinge Bracket
to Right Cart Leg using Phillips Head Screw 3/16"x3/8".
n Repeat steps for Left Door.
(Note: Rating Label on the right door.)
Phillips Head Screw M4x8mm
Qty. 4
Part # S112M04084
(Steel Painted)
Phillips Head Screw 3/16"x3/8"
Qty. 6
Part # S112G0306A
(Black Painted)
Door Handle
Qty. 2
Part # P00201003I
Scale 1:3
11