To set or change thè temperature for baking, To set the controls for baking, To set control for continuous baking – FRIGIDAIRE ES200/300 User Manual

Page 9: To set control for oven lockout, To set control for oven lockout feature, Setting oven con trols

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Oven Con trols

To Set or Change thè Temperature for Baking

The oven can be programmed to bake at any temperature from 170°F to 550°F {65®C to 287®C).

To Set the Controls for Baking:

1. Press ."----------------------- " appears in the display.

or

2.

Within 5 seconds, press the or . The display will show "350°F (177®C).“ By pressing and holding the

the temperature can then be adjusted in 5®F (1°C) increments.

3.

As soon as the or is released, the oven will begin heating to the selected temperature. When the displayed

temperature reaches the desired baking temperature, the control will beep 3 times.

4. To cancel the baking function, press .

To Change the Oven Temperature after Baking has Started:

1. Press and make sure the bake temperature is displayed.

2.

Press the or to increase or decrease the set temperature.

To Set Control for Continuous Bake or 12 Hour Energy Saving:

The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than

11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

To set control for continuous baking:

1. Press (Si), “0:00” will appear in the display.

2. Press and hold {^) down for 5 seconds until tone is heard, “-------------------- hr” will appear in display for continuous cooking. The

current time of day will return to the display.

3. To cancel the Continuous Bake function, press

and hold for 5 seconds until tone is heard. “12hr” will appear in display

indicating that the control has returned to the 12 Hour Energy Saving feature.

To Set Control for Oven Lockout:

The control can be programmed to lock the oven door and Inactivate the oven controls.

To set Control for Oven Lockout feature:

/’iiear'

1. Press and hold for 3 seconds. “Loc” will appear in display, the “Door Locked” indicator light will flash and the motor

driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about

15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display.

/^Clean

2.

To cancel the lockout feature, press J and hold for 3 seconds. The control will unlock the oven door and resume normal

operation.

Note: If any control pad is pressed while In the Oven Poor/Controi Lockout mode,“Loc” will appear in the display
until the control pad is released.

9

Advertising