To stop the drain, To clear the indicators, During the first minute of a cycle – Kenmore 665.16819 User Manual

Page 15: After the first minute of a cycie, To add items

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CHINA
WASH

Use this cycle for china

Use

and crystal. This cycle

covered

uses a light wash and

detergent

gentle dry. During the

dispenser

heated dry, the heating

section,

element cycles on and
off.

Soil

Level

Sensed

Wash

Rinse

Main

Wash

Rinse

Final

Heated

Rinse

Dry

Time
(min)

Water

Usage
(gai/Li

Heavy

#

cycled

70*

6.5/24.6

Light

#

cycled

60*

4.3/16.3

^

N

Use this rinse cycle for

Do noi

QUICK 1

rinsing dishes, glasses.

use

RINSE

and silverware that will

detergent

V

___ !_^

not be washed right

with this

away.

cycle.

Soil

Level

Sensed

Wash

Rinse

Main

Wash

Rinse

Final

Heated

Rinse

Dry

Time
(min)

Water

Usage
<ga!/L)

Heavy

18

4.3/16.4

Light

14

2.2/8.2

NOTE: The sensor in your dishwasher monitors the soil
level. Cycle time and/or water usage can vary from the
numbers above as the sensor adjusts the cycle for the
best wash performance.

Anytime during a cycle, press

\

CANCEL

DRAIN

V_____J

CANCEL/DRAIN glows. The dishwasher pauses for
about 5 seconds and starts a 2 minute drain (if

needed). Let the dishwasher drain completely. The light

goes off when the dishwasher finishes the drain.

To stop the drain

You can press Cancel/Drain again to stop the drain

immediately. Remember to drain the dishwasher before

starting a new cycle.

NOTE: A small amount of water remains in the dishwasher.

This Is normal.

To clear the indicators

Press Cancel/Drain before starting the dishwasher to clear

all options and cycles.

During the first minute of a cycle

Press a new cycle and/or options.

After the first minute of a cycie

1. Press

2

.

3.

CANCEL^

DRAIN

V_____ J

CANCEL/DRAIN glows. The dishwasher pauses for 5
seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely.

Check the detergent dispensers. If the main wash cup
has opened and the detergent washed away, refill the
cups as needed.

Close the door.

4. Press a new cycle and/or options.

5. Press START.

You can add an item anytime before the main wash starts.
Open the door and check the detergent dispenser. If the
main wash section is still closed, you can add items.

To add items

1. Lift up the door latch to stop the cycle. Wait for the

spraying action to stop before opening the door.

2. Open the door. If the main wash detergent dispenser is

still closed, add the item.

3. Close the door, but do not latch it. Wait 30 seconds for

the air in the dishwasher to warm up. This reduces the

amount of moisture escaping from the vent when
restarting a cycle.

4. Close the door firmly until it latches. The dishwasher

resumes the cycle after about a 5 second pause.

You can customize your cycles by pressing an option. If

you change your mind, press the option again to turn the

option off. Select a different option if desired.

You can change an option anytime before the selected
option begins. For example, you can press an unheated
drying option any time before drying begins.

Press START to use the same cycle and option(s) as the
previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle,

when you press Start, the dishwasher runs the last full
wash cycle and options.

15

Advertising
This manual is related to the following products: