Caution – Kenmore ELITE 795.7103 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reinstalling the Refrigerator Door
► Left Door
1. Lower the door onto middle hinge pin (10).
2.
Fit top hinge (7) over hinge lever latch (8) and into
place. Rotate lever (6) clockwise to secure hinge.
3.
Install the grounding screw
(5)
and connect the two
wire harnesses (4).
4.
Push the water tube (3) located at the top of the left
door into the hole beside the left hinge on the top of
the cabinet until it exits through the back.
5.
Insert the water supply tube (3) into the connector until
you see only one scale mark. Fully insert the tube over
Vs
in. (15 mm).
6.
Hook tabs on left side of hinge cover (1) under the
edge of the top hinge (7) and position the cover in
place. Insert and tighten the cover screw (1).
► Right Door
1. Lower the door onto middle hinge pin (9).
2. Fit top hinge (4) over hinge lever latch (5) and into
place. Rotate lever (3) counterclockwise to secure
hinge.
3. Hook the tabs on right side of hinge cover (2) under
the edge of the top hinge (4) and position the cover in
place. Insert and tighten the cover screw (1).
A
A
caution
14