Picking up bobbin thread, Adjusting the pressure of the presser foot – Kenmore 15/I649 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PICKING UP BOBBIN THREAD
Raise presser foot lever
Hold needle thread loosely in left hand and rotate hand
wheel toward you one complete turn-
Brlng bobbin thread up by pulling upper thread (See illus
tration)
Place threads back under presser foot
ADJUSTING THE PRESSURE OF THE
PRESSER FOOT
Push down outer rirtg of presser foot knob (See iliustration),
This will release pressure of presser foot. To Increase
pressure, push down inner pin until suitable pressure Is
obtained >
For ordinary sewing, the inner pin should be about half way
down. When sewing multiple thickness or heavy material,
reduce the pressure. Increase it when sewing sheer fabrics.
insufficient pressure may cause skipped stitches or difficulty
in guiding the fabric. If feed dog or presser foot marks
appear on the fabric, reduce the pressure.