Sewing on lace use disc #1a, Straight or three-cornered tear – Kenmore 15/I649 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
APPLIQUE
Usa disc #1A
Baste cutout appiique to fabric, Set stitch width 2 io
4, Set stitch length at the red mark on the indicator
piate. Zigzag stitch around applique completely cover
ing the raw edge
SEWING ON LACE
Use disc #1A
Set stitch width to Z Set stitch length to 2 or 3 Place
fabric under the presser foot and position lace ihch
from edge of fabric. Position fabric arid lace so that
right stitch catches left edge of lace Continue stitching
so that edge of lace is overcast
STRAIGHT OR THREE-CORNERED TEAR
Use disc #4A
Stitch width 4
Stitch length at red mark
Position tear Under needle and stitch along the straight
tear catching sides of material. When mending a three
cornered tear, stitch from each end to center
22