Kenmore 790.45 - Manual (Page 18)

Setting Temperature Display — Fahrenheit or Celsius:
The BROIL (Broil) and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
Setting Oven Controls
Broil
forTseconds
INSTRUCTIONS PRESS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press (Broil)
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press
(g)
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press C
start ); to accept the change or press to reject the •, start > or ( stop
change.
DISPLAY
30 55(3
Figure 1
Figure 2
Figure 3
Setting Oven Controls
Important Things to Know Before Setting any Basic Oven Cooking Function
This appliance has been factory pre-set to start any BAKE, CONV BAKE, CONV ROAST, PREHEAT, CAKE or BREAD
function with the oven set temperature automatically set for 350°F. However if desired, the oven set temperature may be
adjusted at any time during the cooking process. You may also choose to add a COOKTIME or DELAY START with any of
the functions listed above.
Temperature Visual Display
Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be
shown in the display and will rise as the unit preheat. When the unit has reached its target temperature, a beep will sound
to remind you to place the food in the oven. This feature will be active with the following cooking modes: bake, convection
bake, convection roast, cakes and breads.
NOTE: The lowest temperature that can be displayed is 100°F.
18