Self-clean cycle time length, Press, Display – Kenmore 790.45 User Manual

Page 37: Instructions, When the self-clean cycle is completed, Stopping or interrupting a self-cleaning cycle, Seif-cleaning, D-nn ri, N n „ u, 4'3u hot

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Seif-Cleaning

The cooktop lockout Q feature will be activated during the self-clean and will unlock after the oven has cooled down.

Self-Clean Cycle Time Length

The FLEX CLEAN (n^ pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a

self­

clean

cycle

remembeTfo

allow time for the oven to cool down and the oven door to unlock. This normally takes about

one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.
*lt is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for

heavy soils (to assure satisfactory results).

A CAUTION

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the

side of the oven when opening the door to allow hot air or steam to escape.

PRESS

DISPLAY

A CAUTION

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and

avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY

HOT.

INSTRUCTIONS

To set the controls

for

a 3 hour Self-Cleaning cycle to

start immediately and shut off automatically

1. Be sure the clock is set with the correct time of day and the oven

door is closed.

Press (g). "CLEAN" will flash and "3:00" HR will show in the

display (Figure 1). The control will automatically clean for a 3

hour period (default self-cleaning cycle time). Note: If a 2 or 4

hour clean time is desired, press (g) (g) (g) for 2 hour or

press (g) (g) (g) for a 4 hour clean time. Set the cleaning

time based on the amount of soil: light, medium or heavy (* See
above).

2

.

D-nn ri _

J U U L t n

dXSXS)'^

( D ® ®

Figure 1

3. Press

■’"

start

. The "DOOR LOCKED" icon will flash; "CLEAN",

Q icon and the letters "CLn" will remain on in the display

(Figure 2).

4. As soon as the control is set, the motor driven oven door lock will

begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.
Also, the oven icon will appear in the display (Figure 3).

Note: Allow about 15 seconds for the oven door lock to close.

n ri „

U Lun

I

Figure 2

n n „

u

llh

Figure 3

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the "DOOR

LOCKED" and "CLEAN" icon will remain in the display (Figure 4).

2. Once the oven has cooled down for approximately 1 HOUR, and

the "DOOR LOCKED" and Q icon is are longer displayed, the

oven door can then be opened (Figure 5).

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due

to excessive smoke or fire in the oven:

1. Press

(

stop

2. The oven door can only be opened after the oven has cooled

down for approximately 1 HOUR and the "DOOR LOCKED" icon

is no longer displayed (Figure 5).

4'3u Hot

Figure 4

5:30

Figure 5

37

Advertising