Air conditioner features, Step 1 — to turn unit on, Step 2 — to change temperature setting – Kenmore 309000845 User Manual
Page 6: You will see (whichever you have chosen), Step4 —touse auto cool feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Air Conditioner Features
(continued)
STEP 1 — TO TURN UNIT ON:
YOU WILL SEE:
"
¿Ti
DO THIS:
PRESS ON/OFF
PAD
STEP 2 — TO CHANGE
TEMPERATURE SETTING:
YOU WILL SEE:
UiÄ A -
DO THIS:
PRESS TO RAISE
PRESS TO LOWER
Note: Tap or hold either up(A) or down<v) button until the desired temperature is seen in screen. This temperature will be
automatically maintained anywhere between 60F (16C) and 90F (32C). If you want the display to read the actual room
temperature, see step 5.
STEP 3 — TO CHANGE
FAN SPEEDS:
YOU WILL SEE (WHICHEVER
YOU HAVE CHOSEN):
STEP4 —TOUSE
AUTO COOL FEATURE:
YOU WIU SEE:
■vV.
¿ ^ ^
-
DO THIS:
RESS AUTO
COOL
Note: The fan speed will begin in Ht. then adjust to MED and LO as the room temperature conditions dictate. For example, if
the room doesn't get too warm it will stay at LO. If the room temperature rises quickly, such as a door being opened, it will
automatically go to HI speed. The fan speeds will readjust back to LO as the room returns to the original set temperature.