Pioneer SUPER TUNERIII DEH-P8500MP - Manual (Page 15)

Tuner
3 C
Section
m
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
® Stereo (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
® LOG indicator
Shows when local seek tuning is on.
(3) Band indicator
Shows which band the radio is tuned to, AM
or FM.
® Preset number indicator
Shows what preset has been selected.
(5) Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis­
played, FM1, FM2, FM3 forFM or AM.
4 To perform manual tuning, press ◄ or
^ with quick presses.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
◄ or ► for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
■ You can cancel seek tuning by pressing either
◄ or ► with a quick press.
■ If you press and hold ◄ or ► you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (ST) indicator will light.®
m
3
(Q
En