Master protection agreements, Sears installation service, Protection agreements – Kenmore W10026670B User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Stains, gray whites, dingy colors

Garments damaged

Did you properly sort the load?

Transfer of dye can occur

when mixing whites and coiors in a ioad. Sort dark ciothes
from whites and iights.

Was the wash temperature too low?

Use hot or warm

washes if safe for the ioad. Make sure your hot water system

is adequate to provide a hot water wash.

Did you use enough detergent, or do you have hard

water?

Use more detergent for washing heavy soiis in coid

or hard water.

Are the hot and cold water hoses reversed?

Check that

the hot and cold water hoses are connected to the right
faucets. See “Connect the Inlet Hoses” in the Installation

Instructions.

Did you follow the manufacturer’s directions when adding

detergent and fabric softener?

Measure detergent and

fabric softener. Use enough detergent to remove soil and hold

it in suspension. Dilute fabric softener and add to the rinse
portion of a cycle only. Do not drip fabric softener onto
clothes.

Is there above average iron (rust) in water?

You may need

to install an iron filter.

Were sharp items removed from pockets before washing?

Empty pockets, zip zippers, snap or hook fasteners before

washing to avoid snagging and tearing of load.

Were strings and sashes tied to avoid tangling?

Straps

and strings can easily become entangled in the load, causing
strain on seams and tearing.

Were items damaged before washing?

Mend rips and

broken threads in seams before washing.

Did you overload the washer?

The wash load must be

balanced and not overloaded. Loads should move freely
during washing.

Did you add chlorine bleach properly?

Do not pour chlorine

bleach directly onto load. Wipe up bleach spills. Undiluted
bleach will damage fabrics. Do not place load items on top of

the bleach dispenser when loading and unloading the washer
(on some models). Do not use more than than the
manufacturer’s recommended amount for a full load.

Did you follow the manufacturer’s care label instructions?

PROTECTION AGREEMENTS

Master Protection Agreements

Congratulations on making a smart purchase. Your new
Kenmore® product is designed and manufactured for years of
dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That’s when
having a Master Protection Agreement can save you money and
aggravation.

The Master Protection Agreement also helps extend the life of
your new product. Here’s what the Agreement* includes:

✓ Parts and labor

needed to help keep products operating

properly

under normal use,

not just defects. Our coverage

goes

well beyond the product warranty.

No deductibles, no

functional failure excluded from coverage—

real protection.

✓ Expert service

by a force of more than

1

0,000 authorized

Sears service technicians,

which means someone you can

trust will be working on your product.

✓ Unlimited service calls and nationwide service,

as often

as you want us, whenever you want us.

✓ “No-lemon” guarantee

- replacement of your covered

product if four or more product failures occur within twelve
months.

Product replacement

if your covered product can’t be fixed.

Annual Preventive Maintenance Check

at your request -

no extra charge.

Fast help by phone

- we call it

Rapid Resolution

- phone

support from a Sears representative on all products. Think
of us as a “talking owner’s manual.”

✓ Power surge protection

against electrical damage due to

power fluctuations.

✓ $250 Food Loss Protection

annually for any food spoilage

that is the result of mechanical failure of any covered
refrigerator or freezer.

✓ Rental reimbursement

if repair of your covered product takes

longer than promised.

✓ 10% discount

off the regular price of any non-covered repair

service and related installed parts.

Once you purchase the Agreement, a simple phone call is all that
it takes for you to schedule service. You can call anytime day or
night, or schedule a service appointment online.

The Master Protection Agreement is a risk free purchase. If you

cancel for any reason during the product warranty period, we will
provide a full refund. Or, a prorated refund anytime after the
product warranty period expires. Purchase your Master
Protection Agreement today!

Some limitations and exclusions apply. For prices and
additional information in the U.S.A. call 1-800-827-6655.

^Coverage

in Canada varies on some items. For

full

details

call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances, garage
door openers, water heaters, and other major home items, in the
U.S.A. or Canada call

1-800-4-MY-HOME®.

Advertising
This manual is related to the following products: