Kenmore 790.4672 - Manual (Page 22)

The BAKE Bake pad controls normal baking. If preheating is necessary, refer to the Preheat Feature for
instructions. The oven can be programmed to bake at any temperature from f 70° F to 550° F (the sample shown below
is for 375°F).
INSTRUCTIONS PRESS DISPLAY
Setting Oven Controls (con’t)
Setting Bake
To set the Bake Temperature (example : 375°F)
1. Arrange oven racks, preheat if necessary and place food In oven.
2. Press Bake , "350°" will appearand "BAKE" will flash In the
dlsplay(Figure 1). If a bake of 350°F is needed, press
start
3. Press CZ) (Figure 2). "BAKE" will continue to flash
and "375°" will appear in the display.
4. Press START . A beep will sound once the oven temperature
reaches 375° F and the display will show "375°" and "BAKE"
(Figure 3).
Pressing will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375°F to 425°F)
f. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press Bake
(Figure 4) and "375" will appearand "BAKE" will flash in the
display.
2. Press CZ-) CZ) (Figure 5). "BAKE" will continue to flash
and "425°" will appear in the display.
3. Press i'START :
Figure 6).
"BAKE" and "425°" will stay in the display (See
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster. The
Bake, Broil and Convection elements will also cycle for a better heat
distribution.
: Bake :
® ® C D
START
Bake :
®®®
('30 350
Figure 1
(■30 315
Figure 2
I .‘30 315 S
Figure 3
- j n D i e
J U J ID ______
Figure 4
!• Dfl U DC°
hJU IC j ________
Figure 5
3n u3C°r^
u“CD LU
Figure 6
22