Canceling traffic announcements, Adjusting the ta volume, Tp alarm function – Pioneer AVM-P7000R User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Canceling Traffic Announcements

• Press the TA button while a traffic announcement is being received to cancel

the announcement and return to the original source.

The announcement is canceled but the tuner remains in the TA mode until the TA button is
pressed again.

Adjusting the TA Volume

When a traffic announcement begins, the volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.

• Set the volume by adjusting it during reception of a traffic announcement.

The newly set volume is stored in memory and recalled for subsequent traffic announce­
ments.

Note:

• Volume Attenuator is canceled if a traffic announcement is received in the Volume Attenuator

mode. (Refer to page 56 for details concerning the Volume Attenuator.)

TP Alarm Function

About 30 seconds after the Car icon is extinguished due to a weak signal, a 5 second beep

sounds to remind you to select another TP or EON TP station.

• If you are listening to the tuner, tune in another TP station or EON TP sta­

tion.

In sources other than tuner, the tuner automatically seeks out the TP station with the

strongest signal in the current area 10 (or 30)* seconds after Car icon disappears from the

display.

* Time taken before Seek begins.

TA Function ON

10 seconds

TA, AF Functions ON

30 seconds

Advertising