Other functions, Switching the multi-cd player, Playing discs on a 50-disc type multi-cd player – Pioneer AVM-P7000R User Manual
Page 38: Press the search, Using multi-cd players
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Multi-CD Players
Other Functions
Switching the Multi-CD Player
It is possible to connect up to three multi-CD players by means of a multiple installation
adapter. When two or more multi-CD players are installed, their priorities must be speci
fied. Follow the multi-CD player instructions carefully, and set the address switches prop
erly.
• Each press of the BAND button selects the Multi-CD player in the following
order:
“MAGAZINE 1” “MAGAZINE 2” -► “MAGAZINE 3”
Playing Discs on a 50-Disc Type Multi-CD Player
When a magazine is loaded into a 50-Disc type Multi-CD Player, information on all the
discs in the magazine is read.
Read out will not function if the data for all discs has not already been read in.
If you start playing a disc on a 50-Disc type Multi-CD Player before reading of informa
tion on all discs has been completed, reading of information stops part way through. This
will prevent you from using the ITS function. (If you try and use this function, “NOT
READY” is displayed.)
If this happens, reading of information begins again when you switch to a component other
than the 50-Disc type Multi-CD Player.
Note:
• You cannot use the “Ejecting a Single Dise”, “Frequeney Play”, “Music Group Play”, or “ABC
Disc Title Search” functions with this product.
■ Disc Number Rough Search (for 50-Disc type only)
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the
1-5 buttons. The 50 discs are divided into five blocks, with each of the 1-5 buttons
assigned to a block.
Note:
• Pressing button 5 lets you select the 50th disc only.
• Rough search of discs 1 to 9 is not possible. Use the
A/T
buttons to select a desired disc.
• “NOW LOADING” will be displayed in the following eases:
* If the disc in the extra tray is selected.
* If the disc is moved from the extra tray to the magazine.
(Refer to the 50-Dise type multi-CD player’s owner’s manual.)
1. Press the appropriate button from 1-5 to select the block containing the
desired disc.
2
.
Press the
search.
l
/T button to select the desired disc, after completing a rough