1 repeat keys, 2 inserting and moving paper, 3 viewing mode – Brother AX-325 User Manual

Page 2: 4 margins

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Special note: In this Guide, the "+" sign between two keys, tike ^ + J means that

you press ]$! and hold it down while pressing J .

1 Repeat Keys

The following keys will auiomatically repeat when held down.

All Character key

[-] {hyphen) '

[SPACE BAR]

+ 5

1^+5

IH

_

(carrier moves from one tab to the next)

2 Inserting and Moving Paper

To insert paper:

insert a sheet of paper and press ^ -4-

. Paper will

advance to approximately one inch from the top edge of the paper. Press

g-J to position the carrier on the left margin.

To move

paper: Press ^ to raise the paper by 1/12 inch. Press

]$i + J to lower the paper by i /12 inch.

To move the paper continuously in either direction, hold down the appro­

priate key(s) for more than half a second.

If you raise/lower the paper more than 1/12 inch, the correction memory is
cleared.

D

3 Viewing Mode

Press +

[VIEW]

to turn the viewing mode on or off.

(CD—'

.

^ \

+

V._____>

- J

Viewing Mode OFF

During continuous typing and during viewing, the paper remains at the

typing position.

4 Margins

Move the carrier to me desired position for the new left or right rr.argin
using g-j or

[SPACE] .

To move beyond the position of a current margin, first position the carrier
on the margin and press

[ALT] +

.

When the carrier is on the desired position, press

[ALT]

+ (if you are

setting the left margin), or

[ALT]

+ ]-g (if you are setting the right margin).

The minimum distance between the left and right margins is two (2)

inches, i.e. either 20 characters (Pica pitch), 24 characters (Elite pitch). -

CD

CD

I—10

-Page 2-

Advertising
This manual is related to the following products: