21 automatic corrections on the current line – Brother AX-325 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
21 Automatic Corrections on the Current Line
Tnis typewriter has a 65 character correction memory. It erases the errors
on the current tine.
First, use leH or
[SPACE BAR]
to line up the carrier with the error.
To erase one character;
Press <x] ■ The incorrect character will be
erased and you can type the correct character.
To erase a series of characters, simply hold down < x ] . The carrier will
backspace and correct continuously until you release the key.
To erase one word:
Press CËÏ! , The word is erased and the carrier is
now on the space previously occupied by the first character of the erased
word. You can now retype the word.
If the carrier is positioned in the middle of a word, only the letters from that
position to the beginning of the word will be erased.
The
^
key moves you to the end of your typing line rapidly. Press that
key to take the carrier back to the position it occupied before the correc
tion.
<2
22 Corrections outside of the Correction Memory
Press KH or, [SPACE BAR], ^
^ or + 2 fo rnove the carrier to the
character to be corrected.
Press + 0 , then retype the wrong character (use the [SHIFT] key for
uppercase characters). The incorrect character will be erased.
Type in the correct character.
<s
»
-Page 7-