Bard/janltroutappan/wiluail/ison, Notes – Honeywell CT8611 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
BARD/JANlTROUTAPPAN/WILUAil/ISON
Notes
Q Jumper these two terminals if both are present.
This terminal must be connected to transformer common.
F lemove this factory-in stalled jumper for independent stage
1 heat and cool connection.
I '
Notes
[I This terminal musl be connected to transformer common.
B Leave factory-installed jumper in place.
El Connect muitiple second stage heating loads
to W2 terminals.
12
13
Advertising