Dish preparation, Loading the top rack, Important: do not cover the funnel when loading – Kenmore 587.14209 User Manual

Page 10: Preparing and loading dishes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Preparing and Loading Dishes

Dish Preparation

Scrape away large pieces of food, bones, pits,

toothpicks, etc. The continuous filtered wash system

will remove remaining food particles. Burned-on foods
should be loosened before loading. Empty liquids from
glasses and cups.

Foods such as mustard, mayonnaise, vinegar, lemon

juice and tomato based products may cause

discoloration of stainless steel and plastics if allowed to
sit for a long period of time. Unless the dishwasher is to
be operated at once, it is best to rinse off these food
soils.

Load racks so

that large items

do not
prevent the
detergent
dispenser

from opening.

Check
manufacturer's
recom mendations
before washing items in question.

If the dishwasher drains into a food disposer, be
sure disposer is compietely empty before
starting dishwasher.

Loading the Top Rack

Features and appearance of racks and silverware
basket may vary from your model.

Important: Do not cover the funnel when loading.

The top rack is designed for flexibility in loading a wide
variety of items including cups, glasses, stemware,

small plates, bowls, etc.

Load glasses in top rack. Damage may occur if placed
in bottom rack.

Load plastic items in top rack only. Melting may occur if
placed in bottom rack.

Load items with open ends facing down for better

cleaning and draining.

Damage may occur if delicate items touch each other

during dishwasher operation.

Long-handled knives and utensils can be placed in top
rack.

Be sure nothing protrudes through the bottom of the
rack to block rotation of middle spray arm.

10

Advertising
This manual is related to the following products: