Installation requirements, Portable installation (model 110.4472), Tools needed – Kenmore 110.4472 User Manual

Page 5: Alternate parts

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTALLATION REQUIREMENTS

Parts supplied:

Assemble the necessary tools and supplies before beginning the

washer installation. The parts supplied are in the washer basket.

Portable Installation (model 110.4472)

Tools needed:

■ Pliers that open to

Wie"

(3.95 cm)

■ Utility knife

■ Flashlight (optional)

Parts supplied:

A

A. Flat washers for faucet adapter and fill hose

B. Silver, double-wire hose clamp (for the bottom of the

drain hose)

C. Faucet adapter

D. Flll-and-drain hose

NOTE:

To change a permanent installation to a portable

installation, a kit is required. To order, call your local Sears store
or Sears Service Center. For further information, please call

1-800-4-MY-HOME® (1-800-469-4663).

Ask for Part Number

3935674.

Permanent Installation (model 110.4418)

Tools needed:

■ Pliers that open to l^/is" (3.95 cm)

■ Flashlight (optional)

■ Adjustable or open end wrench

®/is"

(14 mm)

■ Level

■ Wood block

■ Utility knife

■ Measuring tape

A. Drain hose

B. Silver, double-wire hose clamp

(for the bottom of the drain hose)

C. Yellow, single-wire hose clamp

(for the top of the drain hose)

D. Water inlet hoses (2)

E. Flat water inlet hose

washers (4)

F. Beaded tie strap

NOTE:

To change a portable installation to a permanent

installation, a kit is required. To order, call your local Sears store
or Sears Service Center. For further information, please call

1-800-4-MY-HOME® (1-800-469-4663).

Ask for Part Number

4396746.

Alternate Parts

Your installation may require additional parts. For ordering
information, call your local Sears store or Sears Service Center.

For further information, please call

1-800-4-MY-HOME®

(1-800-469-4663).

If You Have:

You Will Need to Buy:

Laundry tub or
standpipe taller

than 72" (183 cm)

Sump pump system (if not already
available)

1" (2.5 cm)
diameter
standpipe

2" (5 cm) diameter to 1" (2.5 cm)
diameter standpipe adapter, Part No.
3363920

Overhead sewer

Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local

plumbing suppliers)

Floor drain

Siphon break, Part Number 285320;
additional drain hose, Part Number
3357090 and connector kit,

Part Number 285442

Water faucets
beyond reach of
fill hoses

2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,

10 ft (3.0 m) Part Number 350008

Drain hose too
short

Drain hose. Part No. 388423 and hose
kit, Part No. 285442

Drain hose that is

too long

Hose kit. Part No. 285442

Lint clogged drain

Drain protector, Part No. 367031

Advertising
This manual is related to the following products: