Cisco 509G - Manual (Page 75)

Using the Web Interface
Setting Do Not Disturb
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 68
5
Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
To set Do Not Disturb:
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
STEP 3 Under Supplementary Services, locate the Do Not Disturb field.
STEP 4 Choose Yes to turn on Do Not Disturb.
STEP 5 At the bottom of the page, click Submit All Changes.
NOTE You can turn off Do Not Disturb from your phone or from the web interface.
Configuring Call Forwarding
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.