Bosch WTMC5321US/CN - Manual (Page 19)

This deposit can easiiy be removed by
wiping the sensors (the two bars next
to the iint fiiter) with a cioth and a iittie
white vinegar.
Use white vinegar oniy!
Ciean the moisture sensor once a
month.
Cleaning the bearing
shield
Over time, fiuff from the drying process
coiiects in the bearing shieid.
This fiuff can be easiiy removed using
your vacuum cieaner, at ieast once a
month.
Change the light bulb
The dryer iight turns on inside the drum
when you open the door.
To change the iight buib:
□
Set program seiector to “Off”.
□ Turn off the circuit breaker.
□ Puii out power suppiy piug.
□ Open the door and iocate the iight
buib on the upper ieft side of the
seai.
□ Loosen the screw of the cover and
open the cover.
□ Turn buib counterciockwise.
Repiace the buib with a new
appiiance buib oniy (obtainabie
through parts department).
□ Repiace the cover and secure with
the screw.
□ Piug in dryer or reconnect power
suppiy.
19