Compaq 285558-001 - Manual (Page 63)

5–2 Software Guide
MultiBoot (Advanced Users Only)
Enabling Media and Devices for MultiBoot
By default, the notebook can start only from a bootable hard drive
or bootable drive medium in the notebook.
The notebook can start up from the following devices only if they
have been enabled for inclusion in MultiBoot:
■
NIC
■
Hard drive inserted into an optional port replicator or
connected by USB
■
Diskette in diskette drive inserted into an optional port
replicator or connected by USB
■
Disk in optional, third-party disk drive inserted into an
optional port replicator or connected by USB
■
CD-ROM, CD-RW, or DVD in optical drive inserted into an
optional port replicator or connected by USB
To enable a device for inclusion in MultiBoot:
1. To open Computer Setup, turn on or restart the notebook,
then press F10 while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press F2.
❏
For navigation instructions, press F1.
2. Use the arrow keys to select the Advanced menu > Device
Options.
❏
To enable bootable media in USB drives or in drives
inserted into a port replicator, select Enable USB legacy
support.
❏
To enable a NIC, select Internal Network adapter boot.