Compaq 285558-001 - Manual (Page 84)

7–6 Software Guide
Setup and Diagnostic Utilities
Selecting from the Tools Menu
Selecting from the Advanced Menu
Select To Do This
HDD Self Test Options Run a quick or comprehensive self test on any
hard drive in the system.
Select To Do This
Language (or press F2 ) Change the Computer Setup language.
Boot Options Enable/disable:
■ QuickBoot, which starts the notebook more
quickly by eliminating some startup tests. (If
you suspect a memory failure and want to test
memory automatically during startup, disable
QuickBoot.)
■ MultiBoot, which sets a startup sequence that
can include most bootable devices and media
in the system. For instructions, see Chapter 5,
“MultiBoot (Advanced Users Only).”
Device Options ■ Enable/disable Num lock mode at startup.
■ Enable/disable multiple standard pointing
devices at startup. (To set the notebook to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
■ Select a parallel port mode: EPP (Enhanced
Parallel Port), standard, bidirectional, or ECP
(Enhanced Capabilities Port).
continued