Chamberlain 985 - Manual (Page 34)

34
We recommend that you program your code before you
install the Keyless Entry. You will not need assistance,
and you can test the reception at the mounting location
before installation.
1. Choose a 4-digit code using numbers from 0 to 9 (a
number can be used more than once, for example, 4, 0,
4, 1).
2. Press the four buttons for the code, then press and hold
the Enter button. The indicator light on the door opener
panel will blink.
3. Press and release the “Smart” (learn) button on the
opener panel. After the opener light flashes, release the
Enter button.
Test by pressing the the code, then press Enter. The door
should begin to move.
You may also program the Keyless Entry from the
Multi-Function Door Control, as follows:
1. With the door closed, enter the four digit code desired,
then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
To Add the Keyless Entry
LOCK
LIGHT
LOCK LIGHT
Accessories Available For Your Opener
Model 973LM
Model 59
Model 974LM
Model 1702
SECURITY ✚ 3-Channel
Remote Control:
Includes visor clip.
SECURITY ✚ 4-Channel
Remote Control:
Includes visor clip.
SECURITY ✚ 3-Channel Mini
Remote Control:
With key ring and Velco fastening
strip.
Multi-Function Door Control Panel:
Provides a Lock Feature which
prevents operation of garage door
opener from portable remotes and a
Light Feature for constant light.
Outside Keylock:
Opens the garage door
automatically from outside when
remote control is not handy.
Outside Quick Release:
Required for a garage with NO
access door.
10 foot Complete Rail:
To allow a 10 foot door to open
fully.
8 foot Complete Rail:
To allow an 8 foot door to open fully.
Model 971LM SECURITY ✚ Single-Function
Remote Control:
Includes visor clip.
Model 972LM SECURITY ✚ 2-Channel
Remote Control:
Includes visor clip.
Model 1708LM
Model 1710LM
Model 97LM
Model 78LM
SECURITY ✚ Keyless Entry:
Enables homeowner to operate garage door opener from outside by
entering code on specially designed keyboard. Also can add a temporary
pass code for visitors or service persons. This temporary code can be
limited to a programmable number of hours or entries.
Model 976LM
Model 970LM Extension Brackets:
(Optional) For safety sensor
installation onto the wall or floor.
Model 98LM Motion Detecting Door Control Panel:
Multi-function door control with motion
sensor that automatically turns opener
lights on for 5 minutes when it detects a
person entering the garage. Sensor can
be easily deactivated when desired.