Concord Camera 2040 User Manual
Page 33
En
32
INSTALLATION GUIDE
INSTALLING THE DRIVER AND DIRECTX 9 – WINDOWS 98 SE
NOTE:
• Do not connect the camera to your computer before the camera drivers and Microsoft
DirectX 9.0 installation is completed.
• The installation Windows messages displayed on the computer screen may vary due to
the different operating systems, but the installation procedures should be the same to
each another.
Step 1
Make sure your camera is powered off and not connected to the computer.
Step 2
Make sure the computer is powered on and Windows is running.
Step 3
Close any other applications or software you may be running.
Step 4
Insert the CD-ROM included in your camera’s packaging into your computer’s
CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the
CD-ROM has been inserted, click on "My Computer" either on the Desktop
or in the Start Menu and locate the CD-ROM Drive. Double click on the CD-
ROM Drive icon for installation.
Step 5
Select the language. Click [OK].
Step 6
The installation screen will appear.
Click on Install Camera Drivers.
Step 7
Click [Next >].
Step 8
The next dialog will prompt you to select the
components that will be installed. The files will be
saved in the Concord Eye-Q 2040 directory
automatically. OR
You may change the default folder by clicking
[Browse…] and selecting a different folder in your
computer.
Click [Next>].
2040 Manual-4L (512950-00) 2003:09:06 2:07 PM Page 32