Concord Camera 2040 - Manual (Page 40)

En
39
CONNECTING THE CAMERA TO THE COMPUTER
CONNECTING THE CAMERA CONNECTING THE CAMERA T T O THE COMPUTER O THE COMPUTER
Note for Windows 98SE/2000 users: Do not connect the camera to your computer before
the camera drivers and Microsoft DirectX 9.0 installation is completed.
1. Power the camera on.
2. Connect the camera to the computer with the Mini-USB cable
provided.
• Plug the larger end of the Mini-USB cable into your PC’s USB
port.
(Please refer to your computer’s documentation for more
information on the location of the USB port.)
• Plug the small end of the Mini-USB cable into the USB port
located on the side of the camera.
DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER
Caution: Do not insert or remove the memory card when the camera is connected to the
computer.
FOR WINDOWS USERS
1. Connect the camera to the computer.
2. Double-click on My Computer.
3. Double-click Removable Disk.
4. Double-click DCIM.
5. Double-click 100_2040.
• The stored pictures (JPG) and video clips (AVI) stored in the internal memory or the
memory card will be displayed.
6. Click and drag the files into a directory in your computer to save them.
• To select all files, click Edit > Select all.
FOR MACINTOSH USERS
1. Connect the camera to the computer.
• After a few moments, the external hard drive will appear on the desktop.
2. Double-click the "untitled" removable drive that is on your desktop.
3. Double-click DCIM.
4. Double-click 100_2040.
• The stored pictures (JPG) and video clips (AVI) stored in the internal memory or the
memory card will be displayed.
5. Drag and drop the image you want to save in the computer.
• To select all files, click Edit > Select all.
Note: You may also transfer the stored pictures and video clips on your memory card onto
your computer by using a memory card reader (sold separately.)
2040 Manual-4L (512950-00) 2003:09:06 2:07 PM Page 39