Cavalry Storage CADA-U3E4 - Manual (Page 7)

CADA4-U3E
5
2
CHAPTER MODE SETUP AND ARRAY MANAGEMENT
SOFTWARE MODE-SETUP METHOD: BASIC
Once you have installed the application and reviewed
the basic functions of BackupQ, you are half-way to
mastering your RAID-array! Open BackupQ and click
the ‘Basic Mode’ and ‘RAID and Disk Information’ tabs.
This will show you the model number of every drive you
have inserted into your CADA-U3E4. It will also tell you
whether or not you have any arrays currently active.
Unallocated disks will appear as “Unreleased”. This
means that they are ready to be used in an array, or
configured for individual usage within your Disk
Management Utility.
The Basic RAID Configuration Tab will allow you to
delete or change the RAID settings of your CADA-U3E4.