Kenwood KT-5020 - Manual (Page 10)

operating instructions
■ Preset tuning
1. Receive a station either by auto tuning or nnanual
tuning.
2. Select preset group A or В with the preset A/B select
key.
• A total of 20 stations can be preset in memory; 1 0 in
group A, and 10 in group B.
3. Press the MEMORY key.
• The MEMORY indicator lights for about 5 seconds.
4. While the MEMORY indicator lights, press one of the
preset station keys.
The MEMORY indicator goes off, the preset indicator
lights up, and the frequency of the received station is
preset under the selected key.
■ How to receive a preset station
1. Select preset group A or В with the preset A/B select
key.
2. Press the preset station keys under which the fre­
quency of the desired station has been preset.
3. Adjust the volume and tone on the amplifier.
* Select preset group A or В by the A/B select key.
The preset memory contents are backed up for at least
three days even after the power cord is disconnected.
■ FM IF BAND key
This key switches the intermediate frequency passing
band between "WIDE" and "NARROW". When listening
in an area where there is no radio interference, press the
key so that the "FM IF BAND" indicator lights to indicate
the WIDE mode: High-quality sound without distortion
can be recording.
When interference is noticed, set the switch off for the
NARROW mode: The radio wave selectivity is improved,
thereby resulting interference free reception.
10 KT-5020 (En}
IT