Coway CHP-06ER/L - Manual (Page 10)

18 19
OPERATION PART
/INDICATION PART
HOW TO OPERATE
When using hot water select
hot water mode selection
button and check if the hot
water mode lamp goes on.
Hot water mode selection button
To use hot water
Press the hot water mode selection
button, check if the hot water mode
lamp goes on.
■
To use cold water
Press the cold water mode
selection button, check if the cold
water mode lamp goes on.
■
To select the mode of HOT/COLD, press each button for more than 2 seconds, and then the lamps
of the mode indicator for cold and hot water are either turned on or off.
※
5
When using cold water select
cold water mode selection
button and check if the cold
water mode lamp goes on.
Cold water mode selection button 6
Operation
Part/Indication
Part
How
to
Operate
▶ To drink cold water
Press the cold water mode selection button and check the cold water
mode lamp of it operation condition.
When the cold water temperature indicator at the indication part is on turn the
cold/room water changeover faucet to the left and push the cup-touch lever and
you may drink cold water.
▶ To drink hot water
Press the hot water mode selection button and check the hot water mode
lamp of it operation condition.
When the hot water temperature indicator at the indication part is on push the cup-
touch lever of hot water and push safety button and you may drink hot water.
�
When the cold water does not extract from the filtration system
please check if the cooling mode indicator is on (See P19).
�
When the hot water does not extract from the filtration system
please check if the heating mode indicator is on (See P19).
How
to
U
se
▶ Operation Part/Indication Part
/