Coway CHP-06ER/L - Manual (Page 9)

16 17
PREPARATIONS
OPERATION PART
/INDICATION PART
▶ Please check before use
Then, open the feed valve to supply water to the filtration system.
Connect it to voltage rating that matches it on the rating plate.
When the lamp on the indication
parts are turned out
When the lamp on the indication parts
are turned out please check the reason
for break of electric supply in case of
electricity failure or other conditions.
■ After installation
Use after throwing away the water
in the water tank up to full level
more than twice.
■
Regular filter change
The regular filter change is very important to
have clean water. The filter after life is ended
may degrade the performance. Thus, do
not miss the time for the filter change.
■
In case of no service for a long time
In case of no service for a long time,
completely drain the water from the tank.
Next, fill and empty water again. And use
the product.
■
When not using for a long time please
lock the main water supply valve and
plug out the power cord.
Preparations
Operation
Part/Indication
Part
▶ Operation Part/Indication Part
Hot water mode lamp Cold water mode lamp
▶ ▶ ▶
Cold water mode selection button
Hot water mode selection button
▶ ▶ ▶
Cold water
Temperature Indicator Hot water
Temperature Indicator
According to the water
temperature of hot water,
the indicator are turned on.
The more lamp on the
indicators, the more hot
water.
Hot water Temperature
Indicator
According to the water
temperature of cold water, the
indicator are turned on.
The more lamp on the indicators,
the more cold water.
Cold water Temperature
Indicator
When selecting hot water
mode, the indicator lamps on.
Hot water mode lamp
When selecting cold water
mode, the indicator lamps on.
Cold water mode lamp
1 2
1
3
2
4
3 4 6
5
How
to
U
se
/