Specifications – Uniden MC480 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
GENERAL
Channels :
Transmit 55
Receive 55
Frequency Control
Method :
PUL synthesizer
Antenna Impedance :
50 ohms, nominal
Speaker :
2,85 Inch, 8 ohms
Microphone ;
Rugged 600 ohms dynamic element with coiled cord and
plug-in connector
Channel Display :
LED numerical readout
DOC Approval :
Type approved under Australia Department of Communica
tions
Frequency Stability :
±0.0005%
Operating Tempera
ture Range :
-20‘’Cto +50“C
Shock and Vibration :
Meets or exceeds El A standards, RSI 52A and RS204A
Si 26 :
7-1/4''W(185m/m) x9-7/8"L{250m/m) x 2-1/4"H(58m/m)
Weight :
4.5 LBS
Controls :
On-Off/Volume, squelch & dimmer controls
Selector Switches :
1W/25W power selector. Instant channel 16 and main
channel selector switches
Connectors ;
Antenna, microphone, remote speaker, DC power
Frequency Range :
156 to 158 MHz transmit
156 to 163 MHz receive
Lights and
Indicators :
Red/Green Transmit-Receive LED, Green 7 segment LED
Channel Readout, Low Power & Channel 16 LED
Standard Accessories:
Plug-in microphone, mounting bracket and hardware, DC
power cord, mike hanger, spare fuse, owner's manual.
Supply Voltage :
13.8V DC negative ground
TRANSMITTER
Power Output ;
25 or 1 watt (switch selectable)
Power Requirement :
25 watts output: 4.5A @ 13.8V DC.
1 watt output : 1 .OA @ 13,8V DC.
Modulation :
FM, ±5 kHz deviation (FCC designator 16F3)
- 2 -