Engine noise suppression, Front panel controls and indicators – Uniden MC480 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENGINE NOISE SUPPRESSION
Interference from the impulse noise generated by the electrical systems of engines is
sometimes a problem with radios. The MC480 has been designed to be essentially
impervious to ignition impulse noise and alternator noise. However, in some
installations it may be necessary to take measures to further reduce the effect of
noise interference. All DC battery wires, antenna lead, and accessory cables should
be routed away from the engine and engine compartment and from power cabling
carrying particularly high currents.
In severe cases of impulse noise interference, it may be necessary to install a noise
suppression kit that is available from your UNiDEN Dealer.
FRONT PANEL CONTROLS AND INDICATORS
(D (D @ ®
®
1. MICROPHONE CONNECTOR . . . Plug your Microphone in here.
2. ON/OFF VOLUME KNOB ... is used to turn on the radio and set the volume
to a comfortable level.
3. SQUELCH KNOB ... is used to quiet background noise when no signal is
being received. Turn the knob just past the pointât which background noise is
objectionable.
4. CHANNEL SELECTOR ... is used to select the desired channel. The channel
is displayed by the LED readout.
- 7 -