Using the directlink feature – Uniden Cordless Telephone User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2) PRIVACY MODE ON will appear in the display for 2 seconds, but the |j| icon will appear and remain in the dis­

play until the feature is turned off. Other stations will not be able to make a call and their display will list UN­

AVAILABLE.

To turn Privacy off, press the

PRIVACY

soft key again. PRIVACY MODE OFF appears.

From the Base:

1) While on a call, press the

MENU

soft key.

2) Move the cursor to

CALL PRIVACY,

and then press the

OK

soft key. PRIVACY MODE ON will appear in the

display for 2 seconds, but the |jj icon will appear and remain in the display until the feature is turned off. Other
stations will not be able to make a call and their display will list UNAVAILABLE.

To turn Privacy off, repeat the procedures listed above. PRIVACY MODE OFF appears.

Using the DirectLink Feature

A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea­

ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone
calls while in use. To activate, you must set both handsets to the DirectLink feature. While using
this feature, these two handsets will not be able to make or receive normal phone calls until this
operation is canceled; however, other handsets will function normally.

Note: If the party is out of range, NO SIGNAL appears in the display and the operation will be

canceled.

1) Press the

MENU

soft key. Select DIRECTLINK MODE menu.

2) Press the

OK

soft key. The display shows TO ENTER DIRECTLINK MODE PRESS

[ENTER].

3) Press the

ENTER

soft key. You will hear a confirmation tone, and DIRECTLINK MODE

COMPLETE appears in the display.

^_____

45

Advertising