Uniden Cordless Telephone - Manual (Page 73)

Symptom Suggestion
The Caller ID does not
display. • The call was placed through a switchboard.
• Call your telephone provider to verify your Caller ID service is current.
There may be a problem with your Caller ID service.
You cannot register the
handset at the base.
• Charge the battery pack in the handset for 15-20 hours.
• Change the Digital Security Code (see page 70).
• Make sure you have not stored 10 handsets already.
The handset doesn’t commu­
nicate with other handsets.
• Change the Digital Security Code (see page 70).
• Make sure that you have registered all handsets.
An extra handset can’t join the
conversation.
• Make sure there are not 2 handsets already using the conference feature.
• Make sure that another station is not in privacy mode.
The Room Monitor feature
does not work. • Make sure to place the handset(s) within the range of the base.
• Make sure that the Room Monitor feature is turned on.
The answering machine does
not work.
• Make sure the base is plugged in.
• Make sure that the answering machine is turned on.
• Make sure that the message record time is not set to Announce only (see
page 55).
Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief
message.-
• The memory may be full. Delete some or all of the saved messages.
There is no sound on the
base or handset speaker
during call monitoring or mes­
sage playback.
• Adjust the speaker volume on the base or handset.
• Make sure the call screen feature is set to on.
72