Installation to extension column – Epson ELPMBPJF User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation to Extension Column
o
Screw extension column (sold separately) to ceiling plate (G). Align the notch with one ofthe four holes in the
ceiling plate (G) and secure extension column with aM5x10 mm socket pin screw (C) using security allen
wrench (B). See detail 1.
Screw extension column connector (I) to extension column. Align slot in extension column with one of the top
holes in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through
extension column connector (I) into slot on extension column using security allen wrench (B). See detail 2.
Screw projector mount (A) into extension column connector (I). Align slot in projector mount (A) to one ofthe
bottom holes in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through
extension column connector into slot in projector mount (A) using security allen wrench (B). See detail 3.
*NOTE: Slotted set screws (K) are used to jam against the threads of each connecting joint to prevent any excess
movement. Do not overtighten screws; overtightening screws will damage threads making it difficult to separate
the products.
4 o f 1 0
ISSUED:01-23-07 SHEET #:055-9498-4 05-20-10
For Technical Support Contact Peerless Mounts at 1-800-729-0307 or708-865-8870.