Canon 400 - Manual (Page 23)

19
OPERATING PROCEDURES
Setting automatic border removal
An image on negative film is displayed on the screen with a black
border around the image, and this black border will also appear in
your printed copy unless you remove it with the automatic border
removal function.
Remove these black borders around your images to avoid wasting
toner when the images are printed.
-or-
You can also leave the border around the image but with very
little of the black color remaining.
Press the Border key to change the setting.
The lamp to the left of the Border key shows you the current se-
lection. To change the selection, press the Border key until the
lamp lights next to the selection you want to use.
( ) Select for removal of all black color around the image.
( ) Select for removing most of the black color around the im-
age.
Note the following restrictions on the use of this feature:
■ For images with ill defined borders, this function may not operate
correctly.
■ This function cannot be used when part of the image is outside the
print frame.
■ If several images are on the screen, the image other than the one
you want may print.
■ This feature cannot print a border larger than 5 mm around an
image.