Toshiba MA-290-100 SERIES - Manual (Page 30)

REGISTERING PROCEDURE FOR SALES
The following are patterns for actual registering operations. In the
following examples, ”1_____ |” indicates an input through the numeric keys,
"[ ]" indicates a depression of the transactionkey, and "------- ” indicates
other registering and/or finalizing operations.
One of the Clerk Keys must be set to the ON position to start operations. The
Mode Lock should usually be set to the "REG" position. However, if the "MGR
Requirement" status is programmed on the transaction key or its operation
sequence, the cashier must ask the store manager to turn the Mode Lock to the
"MGR" position.
MO-SALE (Allowed only outside a sale)
[NS] (or [#/NS])
DEPARTMENT ENTRY
I
PRICE
I
[OPEN] ---
[PRESET DEPT] 4- ---
[PR OPEN] [ price
I
[PRESET DEPT] -»■ ---
NOTES: 1. To enter a price to override the listing capacity, the
[LC OPEN] (or [OPEN]) key may be depressed either before or
after the price entry but before the department key depression.
In this case, a price two-digit larger than the HALC or 1-digit
smaller than the LALC may be entered for one entry only.
2. Tax Modifier Keys may be used to reverse the tax status:
ex.) (¡ price ]) [TX/M] [DEPT]
(I PRICE I) [TX2/M] [DEPT]
( I
price !) [TXI/M][TX2/M]
.. to reverse taxable/non-taxable
status of the department in a
single-tax area.
. . . to reverse Tax2 taxable/non-
taxable status of the
department in a dual- or
triple-tax area.
'DEPT] ... to reverse both Taxi
and Tax2 taxable/non--
taxable status in a
dual- or triple-tax
area.
PLU ENTRY
¡Preset PLU Code| [PLU] ♦ ---
[Open PLU Code
I
[PLU] |PRICE] [AMT] ---
NOTES: 1. The [PR OPEN] key cannot be used for PLU entries.
2. Tax Modifier Keys may also be used for PLU entries. Refer to
NOTE 2 for DEPARTMENT ENTRY above,
3. The "IPLU Code 1[PLU]" sequence may be replaced by a simple
depression of the corresponding key on the PLU KEYBOARD (option)
if connected to the ECR. But the " | PRICE | [AMT]" must be entered
on the ECR keyboard.