Receipt and journal paper end detection, When a power failure occurs, Hardware options available – Toshiba MA-290-100 SERIES User Manual

Page 82: Flu keyboard, Remote slip printer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RECEIPT AND JOURNAL PAPER END DETECTION

When the Receipt or Journal roll comes to the end, the detector autoamtically

functions to inform the paper-end condition, by flickering the amount portion

display (it also flickers when either paper roll is not set properly). In

this condition, no other keys except [RF] and [JF] will be accepted.

In this case, replace the paper roll referring to the descriptions on pages

74

and

75.

When the paper setting is completed, depress the

[c]

key on the

keyboard. Now operations will be accepted. If a printout has been stopped

halfway, it will also be continued. The [C] key will not be accepted before

setting the paper.

WHEN A POWER FAILURE OCCURS ...

When the power is restored from a power failure, the register will display the

last item entered before the power failure if the item was entered through a

motorized key (such as [DEPT], media keys, etc,). In this case, continue the

registering operation. However, if the register displays "FAIL" when the

power is restored, it indicates that the last item entry was not completed

(i.e., only numeric keys or a declaration key such as [RTN MDSE] were operated

but no any motorized key). In this case, first depress the [C] key to clear

the "FAIL" condition, and then do the registering operation again from the

numeric or declaration key entry. In the event of a power failure, please be

sure to check the receipt before it is handed to the customer.

HARDWARE OPTIONS AVAILABLE

The following hardware devices are available as options.

FLU KEYBOARD

It has 130 keys, each of which corresponds to a PLU code. By simply

depressing a key, the "|PLU Code|-»[PLU]" entry sequence is made. Thus

it simplifies PLU operations and saves time. The PLU Keyboard will be

connected to the ECR with a one-meter cable and may be placed on the

check-out counter table near the ECR.

REMOTE SLIP PRINTER

By connecting it, required transactions will be recorded on the remote

slip as well as on the receipt and the journal rolls.

^ 73 -

Advertising
This manual is related to the following products: