Message descriptors (tri-mark lamps), C - ) – Toshiba TEC MA-1040-400 Series User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

NUMERIC DISPLAY

AMOUNT (8 digits):

DPT (2 digits):

RPT (1 digit):

Displays the numeric data, such as amount, quantity,

etc.

Displays the code which represents each Department key.

It says lit when repeating the same department item

entry.

Displays the repeat count of the same item. The count

is indicated from the second entry on, and only the

first digit will be displayed even if the count exceeds

nine.

PLU (3 digitsi the DPT and RPT digits are commonly used for this purpose,):

Displays the PLU code when any PLU is entered. It goes

out when repeating the same PLU entry,

MESSAGE DESCRIPTORS (TRI-MARK LAMPS)

SLP:

ALM:

REG:

C - ) :

FS;

TXBL:

ST:

TL:

CG:

Lights up when a slip has properly been inserted to allow

validation. It flickers to require a slip insertion when validation

compulsion is programmed on the transaction key just operated.

Lights up with the alarm buzzer to indicate that the last operation

or numeric entry has resulted in an error.

To clear the error

condition, depress the [C] key.

Lights up when a sale item has been entered.

Lights up when the [RTN MDSE], [DOLL DISC], [%-], or [ITEM CORR] key

has been operated.

It also lights up when the [ST], [TXBL TL], or one of the total

(media) keys has been depressed and the displayed amount is

negative.

It lights up also when an amount is entered in the

" mode.

Lights up when a Food-Stampable department or PLU item is entered.

It also lights up along with the ”TL" lamp when the [FSTL TEND] key

is depressed.

Lights up when a taxable item has been entered. It also lights up

when the [TXBL TL] key is depressed, indicating that the amount

displayed is the sale total plus taxes due (in which case the "ST"

lamp also lights up). This "taxable total display" function is also

applied when the [ST] key is depressed if the option "Taxable Total

Display on [ST] Key Depression" is selected.

Lights up when the sutotal amount is displayed after the [ST] key

has been depressed.

Lights up on a finalizing operation with the total amount displayed

when a sale is finalized without any amount tendered.

When an amount tendering operation has been performed, this lamp

lights up with the change due displayed.

SHORT: Lights up when the amount tendered is less than the sale total with

the shortage amount displayed.

- 4 -

Advertising