Toshiba T2E - Manual (Page 12)

TOSLINE-F10
The TOSLINE-F10 isaiield network suitable forsm^l distributed I/O systems. Data link between T-series PLCs
is also available. TheTOSUNE-F10 Is extremely easy to setup compared to other field networks.
For the T2E/T2N, two types of TOSUNE*F10 station modules are available.
•MS211: Master station for T26T2N
• RS211: Remote station for T2E/T2N
These station modules can be mounted in any I/O slot, main or expansion rack, of a T2E/T2N system.
Item TOSLINE-F10
Topology Bus
Access method Poltng/selecting
Transmission speed 750 kbps or 250 kbps (selectable)
Transmission cable Twisted pair cable (1.2 mmT
Max. Irartsmisslon distance 750 kbps: 0.5 km (total)
250 kbps: 1 km (total)
Max, number of stations 32 stations
Communication service Scsn transmission
Scan transmission capacity 32 words
Scan data update titne 7 ms/32 words (750 kbps)
12 ms/32 words (250 kbps)
Transmission error check CRC
Connectabie device PLC fT3H/r3. T2N/T2&T2 and T1),
Remote I/O block,
Inverter (VF-A5, G3)
T2N (MS211:(naster)
Tt-40
J k I s HL sJiiiii
I m ■
T1-40 T2E Remote 1/0
(RS211: remote)
Remote I/O
Wh«nVF-AS tsconwcied,
art least ore Semote Input
blocic with kMraret^fon
edOreea mud bo corMto:rted.
Inverter VF-A5
Remote I/O Block Specifications
ttem DI633
Module type DC Input (Dry contact input)
Input voltage 24Vdc. +10/-15%
Min. ON voltage 9.6 V
Max. OFF voltage 3.5 V
Input current 10mA(at24Vdc)
Input points 16 points {16/common}
ON delay 10 ms or less
15 ms or (ess OFF delay
Power vottage 24Vdc.+10/-15%
Item ROS63 D0633
Module type Relay output DC output
Output voltage 24 Vdc, +20% / 12 to 24 Vdc,
240 Vac, +10% (max.) +10/-20%
Load current 2 A/point (resistive) 1 A/point,
4 A/commcm 4 A/common
Output points 16 points (4 X 4/eQinmon) 15 points (16/common)
1
ON delay 10 ms or less 1 ms or less
; OFF delay 10 ms or less 1 ms or less
Power voltage 24 Vdc. +10/-15%
12